MembraTech Solutions India Pvt. Ltd.

EnduRaMem™

A next-generation PVDF and ceramic membrane filtration brand, engineered for durability and operational reliability — built for long-term, high-availability performance across pressurized UF, MBR, and submerged ceramic systems.

Explore the product range → Get in touch

EnduRaMem pressurized UF module

0.03 µ (Nominal)

Pore size across the membrane range

pH 1–14

Chemical cleaning tolerance (no limit on ceramic)

Out to In

Filtration mode, every EnduRaMem platform

Why EnduRaMem

Engineered for long-term, high-availability filtration

Every EnduRaMem platform shares the same engineering philosophy: a robust fiber or substrate, broad chemical tolerance, and consistently high flux.

Robust by Design

A woven-tube reinforced PVDF fiber rated above 100–160 N tensile strength — built for fatigue, fouling stress, and pressure fluctuations.

Chemical Tolerance

Cleans across the full pH 1–14 range with sodium hypochlorite exposure up to 5000 ppm on the PVDF platforms — the ceramic platform carries no defined limit on cleaning pH or NaOCl.

High Performance

Permeability up to 900 lmh/bar on the UF platform (Approx. 100–200% higher), 900 lmh/bar on MBR (Approx. 100–200% higher), and a pure water flux above 1500 lmh on ceramic — with air-hold integrity pressure above 2 bar on the PVDF fiber.

Backed by Experience

Specified and supported by MembraTech Solutions, drawing on more than 20 years of experience in water treatment technology behind every EnduRaMem membrane.

Product Range

Four platforms, one trusted brand

EnduRaMem™ spans pressurized PVDF UF, PVDF MBR modules & skids, submerged UF, and ceramic submerged UF/MBR — engineered and backed by MembraTech Solutions.

Pressurized · Out to In

EnduRaMem UF

Next-generation PVDF ultrafiltration fiber with woven-tube reinforcement for open platform pressurized filtration systems.

>100 NTensile 0.03 µ (Nominal)Pore size >900 lmh/barPermeability (Approx. 100–200% higher)

View product

Submerged · MBR

EnduRaMem MBR

Heavier-gauge PVDF hollow fiber optimized for submerged membrane bioreactor duty, available as modules and pre-assembled skids.

>160 NTensile 0.03 µ (Nominal)Pore size >900 lmh/barPermeability (Approx. 100–200% higher)

View product

PVDF Hollow Fiber · SUF

EnduRaMem SUF

Ceramic flatsheet membrane technology for submerged ultrafiltration applications, featuring an asymmetric porous Al₂O₃ structure.

0.03 µ (Nominal)Pore size >900 lmhPure water flux 1-14 pHChemical cleaning

View product

Submerged · SUF / MBR

EnduRaMem Ceramic

Al₂O₃ ceramic flatsheet modules for demanding submerged UF and MBR environments where PVDF chemical limits are a constraint.

0.05 µ (Nominal)Pore size 6 m²Module area pH 2–12Operating range

View product

Have a project in mind?

Tell us about your application and we'll help you find the right EnduRaMem platform for it.

About Us

50+ years in water treatment, channeled into one membrane brand

MembraTech Solutions India Pvt. Ltd. is the company behind EnduRaMem™ — built to bring a unique, dependable solution to ultrafiltration.

MembraTech Solutions was built on one idea: water treatment professionals deserve a membrane brand that understands the application as well as the spec sheet.

With over 50 years of combined expertise in water treatment technology, our team has lived and worked through every stage of ultrafiltration, MBR, and membrane-based water and wastewater systems. That experience has shown us where conventional membranes fall short—and what plant operators and EPC contractors truly need.

EnduRaMem™ was developed to deliver a dependable, next-generation solution in ultrafiltration, built directly on decades of real-world insight.

50+

Years of experience in water treatment technology

Membrane platforms under one brand

Single point of accountability, spec to support

What We Do

Our Expertise

EnduRaMem™ modules are specified and branded by MembraTech Solutions. Here's what that means for the people who buy and operate them.

Engineering & Design

Process design, P&ID, hydraulic sizing, and CFD-backed module selection for UF, MBR, and pre-treatment trains.

Pilot Trials & Testing

On-site or in-lab membrane piloting with characterization, fouling indices and recovery optimization before plant build-out.

Commissioning & O&M

Site supervision, start-up, integrity testing, CIP/CEB optimization and long-term operations support.

Training & Knowledge

Operator training, classroom modules, and on-site workshops on UF system operation, troubleshooting and chemistry.

Get in Touch

Registered Office

MembraTech Solutions India Pvt. Ltd.
53, Sunshine Industrial Hub-1,
Changodar, Ahmedabad

Enquiries

enquiry.membratech@gmail.com

Talk to MembraTech Solutions

Whether you're specifying a new plant or need support on an existing EnduRaMem™ installation, we're glad to help.

Products

EnduRaMem™ Membrane Platforms

Four platforms engineered for different filtration duties — all specified and backed by MembraTech Solutions India Pvt. Ltd. Select a product to view full technical details.

Pressurized · Out to In

EnduRaMem UF

Next-generation PVDF ultrafiltration fiber with woven-tube reinforcement for open platform pressurized filtration systems. Available in 55–90 m² module sizes.

>100 NTensile strength 0.03 µ (Nominal)Pore size >900 lmh/barPermeability (Approx. 100–200% higher) pH 2–11Operating range

View product

Submerged · MBR

EnduRaMem MBR

Heavier-gauge PVDF hollow fiber optimized for submerged membrane bioreactor duty — modules from 10–30 m², skids from 360–2000 m².

>160 NTensile strength 0.03 µ (Nominal)Pore size >900 lmh/barPermeability (Approx. 100–200% higher) >8000 mg/LMLSS tolerance

View product

PVDF Hollow Fiber · SUF

EnduRaMem SUF

The same woven-tube reinforced PVDF fiber as the MBR platform, configured for submerged ultrafiltration — same high performance, same chemical tolerance.

>160 NTensile strength 0.03 µ (Nominal)Pore size >900 lmh/barPermeability 5000 ppmMax NaOCl

View product

Submerged · SUF / MBR

EnduRaMem Ceramic (SUF / MBR)

Al₂O₃ ceramic flatsheet modules for demanding submerged UF and MBR environments requiring unlimited chemical cleaning tolerance.

0.05 µ (Nominal)Pore size 6 m²Module effective area >0.4 mPaBending strength pH 2–12Operating range

View product

Not sure which platform fits your application?

Get in touch and our team will help you choose the right EnduRaMem platform.

Open Platform Systems · Pressurized PVDF UF

EnduRaMem™ UF

A next-generation PVDF ultrafiltration fiber with a woven-tube reinforcement architecture, delivering superior resistance to fatigue, fouling stress, and pressure fluctuations for open platform systems.

>100 NTensile strength

0.03 µ (Nominal)Pore size

>900 lmh/barMax permeability (Approx. 100–200% higher)

pH 2–11Operating range

5000 ppmMax NaOCl

Out to InFiltration mode

PVDF Fiber Specifications

Parameter	Value
MOC	PVDF
Fiber ID / OD (mm)	0.7 / 1.3
Tensile breaking strength (N)	>100
Pore size (µ) (nominal)	0.03 (Nominal)
Alkaline pH / Acid pH	13 / 1
Sodium hypochlorite (NaOCl) ppm max	5000

Module Dimensions

EnduRaMem UF-78 & UF-55

EnduRaMem UF module dimension diagram showing A, B, C, D, E references — Dimension references A–E (and diameter D) for EnduRaMem UF-78 (78 m²) and EnduRaMem UF-55 (55 m²). See table below for values.

Model	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	Area (m²)
EnduRaMem UF-78	2010	2130	95	225	2360	180	78
EnduRaMem UF-55	1510	1630	95	225	1860	180	55

EnduRaMem UF-90 & UF-65

EnduRaMem UF module dimension diagram (UF-90 / UF-65 variant) showing A, B, C, D, E references — Dimension references A–E (and diameter D) for EnduRaMem UF-90 (90 m²) and EnduRaMem UF-65 (65 m²). See table below for values.

Model	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	Area (m²)
EnduRaMem UF-90	2010	2130	40	250	2210	172	90
EnduRaMem UF-65	1510	1630	40	250	1710	172	65

Module Specifications & Operating Limits

Description	EnduRaMem UF-78	EnduRaMem UF-55	EnduRaMem UF-90	EnduRaMem UF-65
Membrane area (m²)	78	55	90	65
Dry weight (kg)	42	30	50	35
Connections / End cap / Housing	DN50 · uPVC · uPVC
Filtration mode	Out to In
Operating temperature	5–40 ºC
Design flux (lmh)	40–120 (20–50% higher than other PVDF)
Backwash flux (lmh)	80–180
Air scour intensity (lmh) / pressure (bar)	90–150 / 1
Max. operating pressure (bar)	4
Max. filtration TMP (bar)	2.4
Max. backwash TMP (bar)	2.8
Operating pH / Chemical cleaning pH	2–11 / 1–14
Max chlorine (ppm)	5000
Max chlorine exposure (ppm-hrs)	10,00,000
Shelf life (years)	2
Max particle size limit (µ)	300

Permeate Water Quality (Estimated)

Turbidity	TSS	SDI₁₅
<0.5 NTU	<1 ppm	<3

PVDF MBR · Modules & Skids

EnduRaMem™ MBR

The same woven-tube reinforced PVDF fiber, optimized for submerged membrane bioreactor duty with a heavier-gauge fiber. Available as individual modules (10–30 m²) and pre-assembled skids (360–2000 m²).

>160 NTensile strength

0.03 µ (Nominal)Pore size

>900 lmh/barMax permeability (Approx. 100–200% higher)

>8000 mg/LMLSS tolerance

pH 2–11Operating range

5000 ppmMax NaOCl

PVDF Fiber Specifications

Parameter	Value
MOC	PVDF
Fiber ID / OD (mm)	1.0 / 2.0
Tensile breaking strength (N)	>160
Pore size (µ) (nominal)	0.03 (Nominal)
Application pH / chlorine	2–11 / 5000 ppm
Operating flux	≤25 LMH (20–50% higher than other PVDF)
Backwash flux	≥30 LMH
Operating TMP	0.05 MPa

Module Technical Detail — EnduRaMem UF MBR

Model	MBR-10	MBR-15	MBR-20	MBR-30
Dimension (mm)	535×46×1000	535×46×1500	535×46×2000	780×40×2000
Membrane area (m²)	10	15	20	30
Dry weight (kg)	5	7	9	20
Connection	DN15 internal thread / DN15 socket
Membrane fiber / Housing / Potting	PVDF / ABS / Epoxy resin

Skid Technical Parameters

Specification	D24	S48	S46	S80	SS100
Membrane area (m²)	360	720	920	1600	2000
Water production (m³/d)	80–120	160–240	200–300	360–520	320–760
Municipal sewage std. production (m³/d)	100	200	250	450	600
Dimensions L×W×H (mm)	2120×700×1750	2120×1340×1750	2020×1360×2250	3500×1400×2250	2100×1450×4550
Flange / aeration interface	DN50 PN10	DN65 PN10	DN80 PN10	DN100 PN10	DN150 PN10
Dry weight membrane unit (kg)	240	400	455	800	1175
Wet weight membrane unit (kg)	600	1150	1310	2340	3040

Models: ERM-MBR-15-D24, ERM-MBR-15-S48, ERM-MBR-20-S46, ERM-MBR-20-S80, ERM-MBR-20-SS100.

Operational Conditions & Cleaning

Parameter	Value
Temperature	5–40 ℃
pH	2–10
MLSS	>8000 mg/L
TMP	≤50 kPa
NaClO (effective chlorine)	≤5000 mg/L
Oxalic acid	0.5–1.0 wt%
Citric acid	1.0–3.0 wt%

Permeate Water Quality (Estimated)

Turbidity	TSS	SDI₁₅
<0.5 NTU	<1 ppm	<5

PVDF Hollow Fiber · Submerged UF

EnduRaMem™ SUF

The same woven-tube reinforced PVDF fiber used in the MBR platform, configured for submerged ultrafiltration duty. Available as individual modules (10–30 m²) and pre-assembled skids (360–2000 m²) — delivering the same high performance and chemical tolerance as the MBR range, in an SUF application.

>160 NTensile strength

0.03 µ (Nominal)Pore size

>900 lmh/barMax permeability (Approx. 100–200% higher)

pH 2–11Operating range

5000 ppmMax NaOCl

Out to InFiltration mode

PVDF Fiber Specifications

Parameter	Value
MOC	PVDF
Fiber ID / OD (mm)	1.0 / 2.0
Tensile breaking strength (N)	>160
Pore size (µ) (nominal)	0.03 (Nominal)
Application pH / chlorine	2–11 / 5000 ppm
Operating flux	≤25 LMH (20–50% higher than other PVDF)
Backwash flux	≥30 LMH
Operating TMP	0.05 MPa

Module Technical Detail — EnduRaMem UF SUF

Model	SUF-10	SUF-15	SUF-20	SUF-30
Dimension (mm)	535×46×1000	535×46×1500	535×46×2000	780×40×2000
Membrane area (m²)	10	15	20	30
Dry weight (kg)	5	7	9	20
Connection	DN15 internal thread / DN15 socket
Membrane fiber / Housing / Potting	PVDF / ABS / Epoxy resin

Skid Technical Parameters

Specification	D24	S48	S46	S80	SS100
Membrane area (m²)	360	720	920	1600	2000
Water production (m³/d)	80–120	160–240	200–300	360–520	320–760
Municipal sewage std. production (m³/d)	100	200	250	450	600
Dimensions L×W×H (mm)	2120×700×1750	2120×1340×1750	2020×1360×2250	3500×1400×2250	2100×1450×4550
Flange / aeration interface	DN50 PN10	DN65 PN10	DN80 PN10	DN100 PN10	DN150 PN10
Dry weight membrane unit (kg)	240	400	455	800	1175
Wet weight membrane unit (kg)	600	1150	1310	2340	3040

Operational Conditions & Cleaning

Parameter	Value
Temperature	5–40 ℃
pH	2–10
TMP	≤50 kPa
NaClO (effective chlorine)	≤5000 mg/L
Oxalic acid	0.5–1.0 wt%
Citric acid	1.0–3.0 wt%

Permeate Water Quality (Estimated)

Turbidity	TSS	SDI₁₅
<0.5 NTU	<1 ppm	<5

Ceramic Flatsheet · SUF / MBR

EnduRaMem™ Ceramic (SUF / MBR)

Al₂O₃ ceramic flatsheet module platform for demanding submerged UF and MBR applications where unlimited chemical cleaning tolerance is essential. Features an advanced asymmetric porous structure combining a coarse-particle ceramic supporting substrate with a precision nano-particle filtration layer.

0.05 µ (Nominal)Pore size

>1500 lmhPure water flux

>0.4 mPaBending strength

No LimitChemical cleaning

pH 2–12Operating range

SUF + MBRApplications

Ceramic Flat Sheet Specifications

Parameter	Value
MOC	Ceramic, Al₂O₃
Membrane type	Flatsheet
Pore size (µ) (nominal)	0.05 (Nominal)
Bending strength (mPa)	>0.4
pH range (operation)	2–12
Dimensions L×W×T (mm)	600×145×5.5
Effective area per sheet (m²)	0.174
Operating temperature (ºC)	0–60

EnduRaMem C-6.0 Module Specifications

Parameter	Value
Model	EnduRaMem C-6.0
Membrane type	Flatsheet
Effective area (m²)	6
Module dimensions L×W×H (mm)	710×576×160
Module dry weight (kg)	37
pH range	2–12
Max. filtration pressure (mBar)	−600 to −800
Max. backwash pressure (bar)	1.5
Application	SUF, MBR

Chemical Tolerance (Cleaning)

Parameter	Value
Max NaOCl (ppm)	No Limit
High pH cleaning	No Limit
Low pH cleaning	No Limit

Let's talk about your application

Whether you're specifying a new plant or supporting an existing installation, MembraTech Solutions is your single point of contact across the EnduRaMem™ range.

Email

For specification queries, technical support, or general enquiries:

enquiry.membratech@gmail.com

Registered Office

MembraTech Solutions India Pvt. Ltd.
53, Sunshine Industrial Hub-1,
Changodar, Ahmedabad

Get directions

Send us a message

Fill in the form and it will open in your email client, addressed to our enquiries inbox.

Resources

Documentation & downloads

Product datasheets, software, and technical documentation for the EnduRaMem™ range. These sections are being populated — check back shortly.

EnduRaMem UFPressurized PVDF UF Module · PDF EnduRaMem MBRMBR Modules & Skids · PDF EnduRaMem Ceramic (SUF / MBR)Submerged Ceramic UF Module · PDF

EnduRaMem Software LoginWeb application · membratech.co.in

Coming soonTechnical documents will be available to view and download here.